Home Inversion Table Teeter Inversion Tables Teeter FitSpine X-Series Inversion Table, 2019 Model, Back Pain Relief Kit, FDA-Registered (X1)

Teeter FitSpine X-Series Inversion Table, 2019 Model, Back Pain Relief Kit, FDA-Registered (X1)

  • Max weight capacity: 300 lbs
  • User height adjustment: 4’8” – 6’6″
  • Easy assembly required
  • Folding design
  • FlexTech backrest with stretch grip handles
  • Precision rotation inversion control
  • Acupressure nodes and lumbar bridge included
  • Ergonomic ankle supports
  • Tether strap angle limitation system
  • EZ-Reach ankle lock lever (X2 & X3 models)
  • Long side safety handles (X2 & X3 models)
  • Traction handles (X3 model)
  • padded headrest
  • Rear floor stretch handle
  • 5 year full warranty from manufacturer
  • Registered FDA 510(k) medical device
  • Getting started DVD included
  • View the X2 and X3 on visiting the retailer

Description

The Teeter Fit Spine X-Series are Teeters “new for 2019” inversion tables.

The Teeter X-Series inversion tables are upgraded models to the EP range and possess fairly similar features to the Ep-560 and EP-960, a pair of tables that were previously considered Teeters best inversion tables.

The main change from the EP range of inversion tables, is the futuristic looking backrest on the X-series models that gives the inversion table a really sleek look.

You also have the choice of one of three models – the X1, X2 or the X3.

The X1 is the most basic and cheapest inversion table from the X range and as you have probably guessed the X3 is the most feature packed and expensive. We will look into the differences between each model further down the page.

As with all Teeter inversion tables the X-series have already started to get some very high ratings, despite only being recently released at time of writing.

It is likely to be only a matter of time until the X-series inversion tables are considered to be the best inversion table from the Teeter range as they gain more popularity.

Teeter FitSpine X-Series Inversion Table Features

Teeter FlexTech backrest:

The new FlexTech backrest on the Teeter X-series has to be one of the most outstanding backrests seen on an inversion table.

The futuristic, transformer-like angular design really stands out and is very visually pleasing.

As with the ComforTrak backrests found on the EP-560 & 960 Teeter models the FlexTech backrests are not padded.

This however is an advantage, as it allows for better spinal decompression as your body is able to slide down the table while you invert more easily.

As with the EP model ComforTrak backrests, the FlexTech backrests on the X1, X2 and the X3 inversion tables from Teeter feature a ridged design which allows for accessories to be added to the backboard.

The backrest also features Teeters trademark small black padded headrest and 3 stretch grip handles.

There are two grip handles located on each side of the headrest and one located above it at the top of the bed area.

These grips are a great addition that allow for more stretching options while inverted.

The FlexTech backrest provides great comfort and exceptional support while using the inversion table.

On the back of the table bed there is also an 8-point floating suspension system gives the backrest a flexible design that flexes as you move to maximize decompression.

Lumbar Bridge and Accupressure Nodes included:

On the EP-range of inversion tables from Teeter these additional accessories had to be bought separately (unless you opt for the slightly more expensive LTD packages).

However with the X-series they are included in the standard price.

As you can see in the image to the right (optional accessories), you can add the acupressure nodes to the backrest via the ridges meaning you can place them pretty much anywhere on the table backrest to suit your preference.

The accupressure nodes are a great addition that allow you to apply pressure to certain areas of the back.

You can either shift your weight around the nodes to simulate a shiatsu style massage or simply rest upon the nodes to maintain steady and continuous pressure.

The lumbar bridge is also a great accessory to add extra support and traction to the lower region of the back.

As you can see in the image to the right there a numerous slots in which the lumbar bridge can be placed on the backrest.

This allows the user to set the bridge to a high curved angle to really protrude from the bed, or set it to a more subtle angle to provide a less noticeable amount of lower back support.

Both of these added extras are great features that really add to the inversion experience. They are also accessories not often currently found on other inversion tables making them quite unique to the Teeter range.

The Main Differences between the X1, X2 and X3 and the Similarities: 

As you can see from the images above all 3 models are fairly similar. On the left is the Teeter FitSpine X1 inversion table, the X2 is in the middle and the X3 on the right.

The Similarities:

Each features the same FlexTech backrest and features a tether strap angle limitation device to restrict the inversion angle should you not wish to invert too much on certain sessions.

Each table also features comfortable wrap around ankle cups for secure support for your ankles while inverting.

All of the X-series inversion tables from Teeter also feature precision rotation which allows the user to easily control the inversion process. Simply by raising or lowering your arms you can balance the inversion table and rotate it in a controlled manner.

The tables also feature optional lock out in full inversion to keep the tables backrest securely in place when inverting fully.

The last similarity is the curved stretch bar you can see at the back of the inversion table on the lower back floor bar. The bar has been raised to provide a curve so that users have further support or an additional stretching support while inverting.

The Differences:

Side handles:

As you can see in the above images the X1 inversion table has fairly small side support handles when compared to the long full length side handles on the other two models.

For those comfortable with inversion this may be fine, however, personally I prefer longer side handles due to the extra support and assistance they can give while inverting and reverting.

Ez-Reach Ankle locks (not on X1 model): 

The Teeter X2 FitSpine inversion table features the standard EZ-Reach ankle lock system (pictured right) whereas the X3 features the Deluxe EZ-Reach Ankle lock system.

As you can see in the above images both the X2 and X3 have extra long levers protruding from the ankle lock area.

These features are great should you wish to avoid bending down fully in order to secure your ankles. A good design feature for those who suffer from back pain.

The EZ-Reach ankle levers also provide good security and safety. The deluxe system (on the X3) also has a triple lock system and a micro-adjustment feature.

Overall this is a nice feature to consider, should you wish to avoid putting strain on your back while bending down or if you prefer a little more security.

EZ-Stretch traction handles (X3 only):

The traction handles are only available on the Teeter FitSpine X3 inversion table and are a great way to add traction at lower angles.

The traction handles are a good choice for those who are perhaps getting used to inversion, or for anyone who prefers not to invert at higher angles but still desires some good decompression from a inversion therapy session.

Simply pushing on these handles provides additional decompression and stretching options.

You can also rhythmically push the handles to allow for oscillated movement or use them as an additional aid when returning to an upright position from full inversion.

You can view the traction handles in the image to the right pointing upwards above the side handles.

Other features and quick specs:

  • Max weight capacity: 300 lbs
  • User height adjustment: 4’8” – 6’6″
  • Easy assembly required
  • Folding design
  • FlexTech backrest with stretch grip handles
  • Precision rotation inversion control
  • Acupressure nodes and lumbar bridge included
  • Ergonomic ankle supports
  • Tether strap angle limitation system
  • EZ-Reach ankle lock lever (X2 & X3 models)
  • Long side safety handles (X2 & X3 models)
  • Traction handles (X3 model)
  • padded headrest
  • Rear floor stretch handle
  • 5 year full warranty from manufacturer
  • Registered FDA 510(k) medical device
  • Getting started DVD included

Are the Teeter FitSpine X-series Inversion tables a good choice?

Although (at the time of writing) it may be too early to tell how these new X-series Teeter inversion tables will be received by the general public. My guess is, they will soon be one of (if not) the best options around.

You simply have to look at the buyer reviews on other previous Teeter inversion table models (for example the EP-960), to see what a great company they are when it comes to producing very high quality inversion tables.

Teeter are a company that put a lot of effort into constantly upgrading and redesigning their already excellent inversion tables. Over time I expect the buyer ratings on this X range to be as good as the highly rated EP range from Teeter.

Since many of the features on the X-series can be found on models from the similarly priced EP range from Teeter, the new and improved FlexTech backrest is clearly the main reason to opt for this particular inversion table.

Overall the X-series inversion tables from Teeter are a very stylish choice that are guaranteed to provide the great functionality Teeter are famous for.

They also have plenty of useful features that are great for beginners and for those more experienced with inversion therapy.

Reviews

There are no reviews yet.

Be the first to review “Teeter FitSpine X-Series Inversion Table, 2019 Model, Back Pain Relief Kit, FDA-Registered (X1)”

Your email address will not be published. Required fields are marked *