The Health Gear ITM5500 is one of our recommended inversion tables that feature heat and vibration massage functionality.

The Health Gear ITM 5500 is fairly good value for money and has some very nice features.

Its bold racing style design is also something that sets it apart from many other inversion tables.

One minor issue some have however, is this inversion tables inability to go fully into 90 degree inversion. It does however, get very close to the full 90 degrees, but users are unable to hang freely from the backrest.

4 inch thick padded ‘racing style’ backrest:

The red and black backrest on this particular model really helps it to stand out from the crowd.

The racing style bed area is padded with 4 inches of memory-style foam, for firm yet comfortable stress free inversion therapy sessions.

The heating pad can be placed in the center of the padded backrest and seamlessly integrates to the design of the bed.

You can also remove the heat and vibrate pad should you prefer and the padded backrest remains a highly comfortable feature.

Due to the contoured design of the backrest it is also provides very good support to the user.

Pin selector angle limiter, extended ankle lever and rear stretch bar:

These extra features really add some nice touches to this Health Gear inversion table.

The pin selector angle limitation device is a system that is increasing becoming more and more popular.

If you wish to limit the angle of your inversion session you can do so by placing the limiting rod into one of the marked angle slots.

You can choose to limit the angle to 20, 40 or 60 degrees, or opt to not use the device to allow for (almost) full 90 degree inversion.

The pin system is very easy to use and quick to adjust, although some may find it a little limiting due to there only being 3 angle options to choose from.

The extended ankle lever is also becoming a popular addition to modern inversion tables.

It is particularly useful for those wishing not to put any additional strain upon their back while securing their ankles into the dual foam rollers.

The lever reduces the need to bend down too far when securing yourself onto the table, as is sometimes required on some other inversion table models.

The raised bump on the rear lower frame bar is also a great addition which can provide extra stability while inverted.

It also allows the user to stretch themselves a little more while in an inverted position.

Advanced heat and vibration massage pad:

The heat and vibration massage pad on the ITM-5500 inversion table runs all the way up the inside of the backrest, providing some soothing and relaxing heat and vibro massage while you invert.

The pad is electrically powered and can be plugged into a main socket to operate.

It also features a wired remote control which allows the user to adjust the heat and vibration settings, while they are inverted.

You also have the option to remove the pad should you require.

This also allows the heat pad to be used elsewhere such as on the bed or a sofa.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 5’1” – 6’5″
• Assembly required
• Folding design
• Thick padded racing style backrest
• Ergonomic dual roller ankle supports
• Extended ‘easy to reach’ ankle lock lever
• Pin inversion angle limiter (20/40/60/90 degrees)
• Long side safety handles
• Advanced heat and vibration massage pad
• Rear floor stretch handle

Is the Health Gear ITM5500 heat and vibration massage Inversion table the best choice?

When it comes to inversion tables that feature heat and massage functions, there a some pretty good options to choose from.

Due to its fairly good price the Health Gear ITM 5500 inversion table is certainly one of the best options currently available.

You can view some of the other options here in our best heat and massage inversion table guide.

Even if you opt not to use the heat and vibro massage pad, the ITM5500 is still a very good inversion table overall.

The extra features and the large padded backrest make it a very functional, comfortable and well built inversion table.

As is found with many inversion tables that feature heat and massage pads, there are a few complaints that the heat and massage functions are not particularly strong.

This however, is to be expected considering the price.

You simply will not get the same quality of heat or massage on an inversion table, that you would expect to find on a massage chair or high end massage product.

You can see for yourself what other buyers are saying about this fairly well rated inversion table in the next tab.

Overall this is a very good heat and vibrate inversion table to consider, just don’t expect too much from any heat and vibrate inversion table in this price range.

The Innova ITM 4800 advanced heat and massage therapy inversion table is a very similar table in many respects to the lower priced Innova ITX 9600 (one of the best budget inversion tables currently available.)

The main difference with this table is the heat and vibration massage pad. In fact this feature is really the only reason you would opt for this inversion table over the ITX 9600.

If you have no interest in the heat and vibration massage pad we recommend you save some cash and have a look at the Innova ITX 9600 inversion table.

On the other hand if you are on the lookout for a fairly well priced inversion table that has heat and massage functions this is one of the best available!

Padded backrest and adjustable headrest:

The large and fairly wide padded backrest is a feature that is commonly found on many modern inversion tables and is always a nice feature that provides welcome comfort.

The adjustable headrest however is a less common feature.

The adjustable headrest is useful as it allows the user to customize the table a little more to their body length and comfort preference.

The footrest can also be adjusted in small increments also providing even more specification.

Pin Selector angle limiter:

If you wish to limit the angle at which you invert at on this inversion table you can use the pin selector device on the side of the table.

While this system is a little more rigid than the usual tether strap device, there are plenty of angles to choose from.

When using the Innova ITM4800 you have the choice of 5 angular increments as well as full 180 degree inversion.

The angle can be limited to either 15, 30, 45, 60 or 85 degrees. These can be selected by simply placing the selector rod into the corresponding slot.

There is also a 90 (180) degree slot on top of the device where you can place the pin if no restriction is desired.

Heat and vibration massage lumbar pad:

The real stand out feature is the lumbar pad with the heat and massage functions.

It is fairly common for heat and massage functions and pads on inversion tables to feel a little useless to some users.

On other models many will state how ineffective the heat was, or how weak the massage is. However on this model, many reviewers feel it is a very good feature.

The pad is powered by the mains and can be plugged into a wall socket to operate.

The wire for the pad is also fairly long so you don’t have to worry about setting the inversion table up near a power outlet.

The heat and massage pad is operated using a wired remote control which lets you choose between auto and manual settings.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 4’10” – 6’6″
• Item Weight: 57 lbs
• Assembly required
• Folding design
• Padded backrest
• Ergonomic ankle supports
• Adjustable headrest and footrest
• Pin inversion angle limiter (15, 30, 45, 60, 85 degrees)
• Long side safety handles
• Lumbar pad with heat and vibration massage

Is the Innova ITM4800 heat and vibration massage Inversion table one of the best options?

The Innova ITM 4800 is a very good inversion table to consider, it has very positive reviews and the heat and massage pad is a great addition!

However before committing to this table be sure to take a look at the more advanced Innova ITM 5900 inversion table.

While the 5900 inversion table from Innova does cost a tiny bit extra, it is overall a better and slightly more advanced inversion table.

It also comes complete with a full spinal massage and heated lumbar pad which covers more of the spinal area compared the lumbar pad on this 4800 model.

The buyer reviews for this ITM4800 Innova inversion table are very positive overall and this is one of the most popular heat and massage inversion tables currently available.

It is also very well priced and one of the cheapest heat and massage inversion tables.

Overall we (and many others) feel the Innova ITM 4800 heat and massage therapy inversion table is a very good table to consider.

However, due to the pricing of the Innova ITM5900 often being similar to this model, the ITM4800 is overshadowed somewhat.

If you are prepared to spend a little extra we would recommend you opt for the ITM 5900 over this model.

The Exerpeutic 475 SL inversion table is a similar but newer model to the very well rated Exerpeutic 225 SL inversion table.

Both the 475 and 225 SL are very well rated inversion tables and fall into similar price brackets.

However The 475 SL inversion table is (for many) probably a better choice overall due to some slightly better features.

The Exerpeutic 475 SL also has a higher 300 lbs weight capacity and is able to invert to a higher angle (listed as 180 but perhaps closer to 175). Whereas the 225 SL has a weight capacity of 250 lbs and inverts only to 165 degrees at full inversion.

Much like the 225 SL model on this Exerpeutic inversion table you have the choice of either standard ankle holders or more comfortable Airsoft ankle holders (more on these later).

Note – The price stated above is the cost of the inversion table with the Airsoft ankle braces. On visiting the retailer you can view the model with standard ankle clamps which costs less.

1.8 Inch Padded backrest and 2 position headrest:

With each Exerpeutic inversion table the different models tend to have thicker padding on the backrest and a higher weight capacity.

The 225 SL features 1″ padded backrest and has a 250 lbs weight capacity.

The 475 SL (this model) features 1.8″ padded backrest and has a 300 lbs weight capacity.

The 975 SL features 2.3″ padded backrest and has a 350 lbs weight capacity.

The backrest and headrest is padded with 1.8 inches soft foam and and the headrest is separated from the main area of the backrest.

This allows you have the option to either adjust the headrest of the table to meet with the rest of the backrest or extend it slightly to suit your body length or comfort preference.

One difference between this model and the other two Exerpeutic inversion table models listed above, is the 475 SL doesn’t come with a lumbar support pillow whereas the other two do.

However, you could perhaps use a rolled up towel to make a make shift lumbar pillow if you feel it is really necessary. Or opt for one of the other Exerpeutic inversion tables available.

Pin Selector angle limiter, rear floor stretch bar and long side handles:

The pin selector angle limiter is a robust way to limit the inversion angle, should you wish to.

On the pin selector there are 4 options of 20, 35, 55 and 75 degrees.

To limit the inversion angle you simply place the pin in the appropriate slot to hold the table at that angle when inverting.

Choosing the 20 degree slot slot will give a very mild inversion, keeping you fairly close to the horizontal position, whereas at 75 degrees you will be closer to full inversion.

You of course also have the option not to use the limiter and invert fully at around 175 – 180 degrees.

As with most other Exerpeutic inversion tables this table features extra long side handles and an upward curving stretch bar situated on the horizontal rear floor bar.

The stretch bars on Exerpeutic inversion tables are a nice touch and great for easy positioning and increased stability while inverted.

They also provide the option to stretch your whole body in an effortless way while inverted.

Airsoft ankle holders and extra long ratchet lever:

Uncomfortable ankle holders on inversion tables are often one of the main complaints buyers have.

luckily on most inversion tables from Exerpeutic you have the option to choose between regular molded plastic ankle cups or their patent pending Airsoft ankle supports.

Since the Airsoft ankle supports are one of the best features on Exerpeutic tables it is highly recommended you opt for them.

They are a great feature for added support and comfort, however they do boost the cost of the table up a little.

The Airsoft ankle holders have been designed to let air to freely flow into the different chambers of each ankle holder. This allows the supports to mold and adjust to the shape of your legs.

The extra padding on the ankle holders also provides much better comfort than you would get using the standard u-shaped plastic cups.

Nb – You can opt not to have the Airsoft ankle holders on this model by visiting the retailer and choosing the without option. 

Another useful feature on this, and other inversion tables from Exerpeutic is the palm activated ratchet locking system.

This feature allows users to lock their ankles in place without having to bend down and risk putting strain on their back.

While this may not seem a great feature to the more agile among us, less agile users will likely find this feature very useful.

The ratchet also has a double lock mechanism so the ankles are locked in place extremely securely for maximum safety.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 4’9” – 6’6″
• Dimensions: 56 x 32 x 70.5″ (L x W x H)
• Item Weight: 70.5 lbs
• Assembly required
• Folding design
• 1.8 inch padded backrest
• 2 stage adjustable headrest
• Palm activated ankle lock lever
• Double ankle lock system
• Long side safety handles
• Pin selection angle limitation device
• Airsoft ankle supports
• Rear stretch bar

Is the Exerpeutic 475 SL Inversion table a good option?

If you are going to buy an Exerpeutic inversion table, the 475 SL is one of the top 2 best options available. The other being the more expensive Exerputic 975 SL which is also an extremely good choice.

The best reason to opt for this inversion table over many others is due to the many features, most notably the Airsoft ankle holders.

Although budget inversion tables can be very good in their own respect, many lack the added extras and comfort found on inversion tables like this, that tend to be around double the price.

The headrest, backrest and Airsoft ankle supports all combine to make a very comfortable inversion table that provides great support and a stable solution for inversion therapy.

The design of this inversion table is very robust and the table is well made, as are all of the Exerpeutic inversion products listed on our site.

If cash is not a big deal, we would really recommend the Exerpeutic 975 SL inversion table over this model.

However, for value for money this inversion table really is worth a look and has some very good ratings as you can see in the next tab.

The Exerpeutic 225SL inversion table is and exceptional inversion table that has left many buyers very happy with their purchase.

Like many of the excellent inversion tables from the Exerpeutic range, this inversion table is very high rated and feature packed.

On visiting the retailer you have the option to purchase this inversion table either with the Airsoft ankle clamps or without (you can read more about these below).

While the Airsoft variant 225 SL model is a bit more pricey than the 175 SL model, adding this option is a good idea if you find the ankle holders on other inversion tables a bit uncomfortable.

1 Inch Padded backrest and lumbar support pillow:

The padded backrest is always a feature people love to have on their inversion table for a little extra comfort.

In addition to the padded backrest, the Exerpeutic 225 SL inversion table also comes with an optional lumbar support pillow.

Using the lumbar support pillow while on the inversion table is a great way to provide a little extra lower back support.

It is also a gentle way to stretch the spine out a little more while inverting.

Rear Cross bar angle limiter, stretch bar and long looped side handles:

The angle limitation device on this inversion table model is a little different to the majority of inversion tables on the market.

On the rear leg of the table there are 3 holders in which the blue cross bar can be placed in order to restrict the inversion angle.

While this is a very straightforward system to use and adjust, it is perhaps a little limiting as there are only 3 settings.

For example, when using an inversion table with a tether strap system you can adjust the strap to accommodate an infinite range of angles.

The Exerpeutic inversion table also features a lower rear bar for easy positioning while inverting and additional stretching.

Airsoft ankle holders and extra long ratchet lever:

The ankle holders are often a feature that receive a bit of criticism on some inversion tables, mainly due to the lack of comfort they provide.

On this inversion table you get a choice as to whether you would prefer regular molded plastic ankle cups (Exerpeutic 175 SL model).

Or if you would prefer the very comfortable patent pending Exerpeutic Airsoft ankle braces on the upgraded 225 SL model.

Although the option of Airsoft ankle holders will cost a little more, it is a nice feature for added support and comfort.

The Airsoft ankle holders allow air to freely flow into the different chambers of each holder allowing the holders to conform better to the shape of your legs.

The extra padding on the ankle holders also provides much better comfort, especially when compared to the plastic molded ankle supports found on many other inversion table models.

Another nice feature on this table and many other from the Exerpeutic range is the palm activated ratchet locking system.

This allows the user to lock their ankles in place without having to bend over.

Also the ratchet has a double lock mechanism so the ankles are locked in place extremely securely.

Other features and quick specs:

• Max weight capacity: 250 lbs
• User height adjustment: 4’9” – 6’6″
• Dimensions: 56.5 x 26.5 x 64″ (L x W x H)
• Item Weight: 64.4 lbs
• Assembly required
• Folding design
• 1 inch padded backrest
• Removable lumbar support pillow
• Palm activated ankle lock lever
• Double ankle lock system
• Long and looped side safety handles
• Cross bar 3 stage angle limitation
• Airsoft ankle supports (only on 225 SL model)
• 165 degree inversion

Is the Exerpeutic 225 SL Inversion table a worthwhile choice?

As you can see from the ratings in the next tab, the buyer reviews for this particular inversion table are very good.

However there are a couple of reasons why some buyers may choose to opt for another inversion table over this particular model!

Firstly the maximum weight capacity of 250 lbs is a little less than the majority of other tables out there. The average is generally 300 lbs.

If 250 lbs is adequate for you, then no problem. Some however may prefer some extra strength.

Some buyers may also be put off by the fact that this table does not invert the full 180 degrees.

Although 165 degrees is still a very good and satisfying angle for many, you are unable to hang completely free of the backrest on this model (as you can see in the image to the right).

All in all, Exerpeutic inversion tables are a very good choice. They are very well made, and designed with a lot of consideration for user comfort and functionality.

In many cases this fairly well priced inversion table certainly exceeds expectations and will be a good choice for most.

However in our opinion the Exerpeutic 975 SL inversion table is still the best model available from the Exerpeutic range!

The Health Mark Pro Max inversion table is one of the strongest inversion tables around and has a very sturdy 600 lbs weight capacity!

If you want to be sure that the inversion table you are getting is as strong and sturdy as it can be, the Pro Max table is probably the best choice for you. Especially since most other inversion tables have a recommended weight capacity of 300 lbs!

The Health Mark Pro Max inversion table features 25 height settings to accommodate a range of users up to 6 ft 6″ in height.

Note* On visiting the retailer you will see the seller states in the FAQ’s this inversion table is suitable for anyone up to 6 ft 11″ in height. However, since the product description states 6 ft 6″ it is probably best to treat this as the actual maximum height this table can accommodate.

If you do need a table that is suitable for those over 6 ft 6″, the Health Gear ITM 7.5 may be a safer choice as it has a height range of 5 ft 1″ to 7 ft. It also has a 400 lbs weight capacity.

Padded foam backrest with massage table style face cradle:

As with many inversion tables this model features a comfortable padded backrest.

Unlike many inversion tables however, the Health Mark Pro Max inversion table features a face cradle that is very similar to those found on massage tables.

This means that the inversion table can be used face down should you prefer. You can of course still use it in the conventional manner also (laying on the table on your back with your face upwards).

So what are the benefits to this feature?

One benefit is that you could potentially use this inversion table as a massage table, or receive a massage while resting on the table.

Some far better benefits however, are the range of exercises and stretches that can be performed when you are inverting face down. The face down position is particularity useful for performing back hyper extensions and exercises that work the lower back muscles.

When used in the more conventional “face up” manner you can perform exercises to work more on the abs area.

Note* We are unfortunately unable to show images of this feature in use, however these can be viewed on visiting the retailer. We would recommend you take a look at these as they really show what is possible on a table that features the face down position option.

5 position inversion angle limitation and extra long side handles:

Due to the design of the Health Mark Pro Max inversion table it has many features you will not find on other inversion tables.

As you can see in images of the table it features very long circular side handles, which are a lot longer than the handles on most inversion tables.

The side handles cover the whole inversion area making them a great help when it comes to returning to the upright position. This makes them a great safety feature to have and a perfect addition for those who are less confident with the whole inversion process.

The side handles also feature 5 pairs of extruding hooks which can be used for limiting the inversion angle.

If you do not wish to invert fully upon the table you can place the limitation bar on either set of the side handle hooks to stop the table from going too far back.

This again is an excellent addition for those who may be new to inversion or for those who feel uncomfortable when inverting fully.

As with all inversion tables the angle limitation system is optional, and 180 degree inversion is possible when the restriction bar is not in place.

Long ankle lever, dual roller ankle supports and thigh and knee roller:

As we have mentioned numerous times on this site, having a long ankle lock lever is a very nice addition for an inversion table.

The long lever on this model ensures you do not have to bend too far over when securing your ankles. This reduces the chances of straining your back muscles.

The dual ankle rollers comfortably cushion your ankles in place and provide equally good comfort whether you use the table front ways or when laying on your back.

This inversion table also features a 3rd padded roller to support your thighs and knees to add extra support and comfort. This again is a feature that is unique to the Health Mark Pro Max model.

Other features and quick specs:

• Max weight capacity: 600 lbs
• Max user height: 6’6″
• Item Weight: 96 lbs
• Assembly required
• Product dimensions: 28 x 58 x 45″ (W x H x D)
• Foam padded backrest
• Head cradle
• Bi positional inversion (face down or face up)
• Dual foam roller ankle supports
• Foam roller knee and thigh supports
• Extra long ankle lever
• Inversion limiter bar system – 5 settings
• Very long side safety handles
• Strong and stable frame design
• 1 year warranty from manufacturer

Is the Health Mark Pro Max Inversion table a good investment?

If you could do with a bit of extra weight capacity this inversion table is hands down one of the best available.

As mentioned earlier, most inversion tables weight capacities do not come close to this inversion table, since it can hold up to twice as much weight as most other tables.

While the high weight capacity is certainly one excellent reason to choose the Max Pro inversion table, it has a lot more to offer.

There are so many things that make this heavy duty 600 lbs weight capacity inversion table stand out as a very unique piece of kit.

The fact that you can use the table face down is an excellent feature which opens lots of stretching and exercise possibilities.

Plus the extra long handles and unique angle limitation system are also great additions.

The one downside (to some) may be the price of this inversion table. Although it can safely hold twice as much weight as other inversion tables, it is also twice the price of many on the market!

However, its high cost hasn’t put many off it and as you can see in the buyer reviews (in the next tab) many love this inversion table, it is especially popular with buyers who weigh over 300 lbs.

As many reviewers have stated, if you are looking for a very heavy duty inversion table this one is unlikely to disappoint. It has a great design and some outstanding features that make it a very good choice of inversion table, whether you need the extra weight capacity or not.

The Health Gear ITM7.5 inversion table is a very solid inversion table, that is highly recommended for those who are a bit too tall for the majority of other inversion tables.

The ITM 7.5 is able to accommodate users up to a height of 7 feet!

This makes it an excellent choice for anyone over 6 ft 6″ (the maximum height range on most inversion tables) who may find other inversion tables are not suitable for their high stature.

In addition to the extra height, the Health Gear ITM7.5 inversion table also provides some extra weight capacity when compared to the majority of other models.

The recommended weight capacity for the ITM7.5 is 400 lbs making it one of the highest weight capacity inversion tables available! (the average is usually 300 lbs)

The overall user height range is 5 ft 1″ – 7 ft.

In addition to this tables sturdy and accommodating design it is also packed with some great features which we will look at below.

Padded 4″ foam backrest with heat and massage pad:

If you are after a padded inversion table this is one of the most padded available, featuring over 4 inches of memory foam style padding in the bed and headrest.

The size of the bed area is also something that really makes this inversion table stand out as it is a very large, wide surface on which to place your body.

Since many padded inversion tables only feature a couple of inches of backrest padding this is certainly above the average. However, do be aware that the padding is stated as memory foam “style” and not listed as actual memory foam.

The headrest of the inversion table is adjustable so you can further add to the comfort by adjusting it to suit your body perfectly. It is due to the adjustable headrest that this table can provide the extra few inches of height that some taller users may require.

This inversion table also comes complete with a removable deluxe heat and vibrating massage pad that can be controlled using the wired hand controller.

Since the heat and massage pad is removable and lightweight you are not only limited to using it on the inversion table. You can also use the pad all around the home on your bed or on the sofa.

The heat and massage functions can be controlled using the handheld remote which allows you to adjust the heat, intensity and duration of the massage function.

Note: One thing to be aware of with heat and massage pads on inversion tables are that they are generally not very strong.

They are not designed to give a full on massage like you would receive from a massage chair. Often these pads simply provide a bit of heat and a gentle vibrate function for a little extra comfort and stimulation.

It is quite common to see buyers have issue with the heat and massage pads included with inversion tables in their reviews. Although it is fairly clear they are expecting a bit much from the pad.

For the most part a heat and massage pad is often a welcome addition for buyers, providing they accept that the functionality will have its limitations.

3 position system for inversion angle limitation:

The inversion angle limitation system is probably the feature that could be most improved upon with this inversion table.

The table features an adjustable bar that runs horizontally across the back part of the frame that can limit the angle of inversion to either 20, 40 or 60 degrees.

This is a fairly ridged and secure angle limitation device to have on the table, however it is a little limited since it only adjusts to 3 specific inversion angles.

Despite this, it is still a useful addition that is ideal for those not wishing to partake in full inversion while using the table.

It is also a simple system to use and adjust.

Sur-lock ankle lever and support system:

The ankle supports on the ITM 7.5 are dual padded high density foam rollers to ensure complete ankle comfort while inverting.

The foam rollers can be easily clamped around your ankles using the extra long ankle locking arm which removes the need to bend down when securing yourself onto the table.

Having an extra long ankle lever is always a nice addition to any inversion table.

It certainly makes securing yourself on the table easier to do and it is less effort than having to bend all the way down to secure your ankles.

Other features and quick specs:

• Max weight capacity: 400 lbs
• User height adjustment: 5’1″ – 7’0″
• Item Weight: 101 lbs
• Assembly required
• Folding locking frame design for easy storage
• 4 inch thick memory foam style padded backrest
• Adjustable headrest (add 6″ height)
• Removable and portable heat and massage pad
• Hand controller to adjust heat and massage settings
• Ergonomic foam roller ankle supports
• Extra long ratchet lever for ankle security
• 20, 40 and 60 degree inversion limiter bar system
• Long side safety handles
• Non slip feet
• Front fork design for stability even on uneven floors
• Frame made from 2.5″ heavy gauge steel tubing
• All Health Gear products are tested to a 50 point performance and safety standards

Is the Health Gear ITM7.5 big and tall Inversion table a good choice?

If you are on the taller side or need a little extra weight capacity the Health Gear ITM 7.5 is an excellent choice.

If you have read our blog post on the best inversion tables for larger people. You will already know that most inversion tables tend to have a maximum weight capacity of 300 lbs and a height range that is limited to 6 ft 6″. You will also know that there are very few inversion tables that exceed these limits.

Therefore if you are over 6 ft 6″ the Health Gear ITM 7.5 is one of the only inversion tables that has been manufactured to accommodate someone of your height.

The high 400 lbs weight capacity is also a great feature!

If you do not need the additional height is it still a good choice?

If you are under 6 ft 6″ you should still find this inversion table a very good table overall. However the price may be a little off-putting, especially if you do not need the extra weight capacity either!

If the high 400 lbs weight capacity is what drew your attention to this particular table, you may wish to take a look at the IronMan 4000 or the Exerpeutic 975 SL.

Both the alternative options listed have (above average) weight capacities of 350 lbs and they are both currently a lot lower in price! So you need to ask yourself if you really need the extra 50 lbs weight capacity that the ITM7.5 can provide?

Overall 

There is no denying that the Health Gear ITM 7.5 inversion table is a pretty good inversion table overall.

It has a number of worthwhile features and the backrest and heat pad are some really good highlights.

However, if you take into consideration the high price of the inversion table, these features alone do not really justify the high price tag.

Therefore, unless you are interested in the ITM 7.5 because of the extra height it can provide or because you feel the 400 lbs weight capacity is necessary for you. It would be more cost effective to purchase a cheaper heavy duty inversion table, such as the Ironman or Exerpeutic models listed above.

The Exerpeutic 975 SL inversion table on first sight looks like an inversion table with a lot going for it!

Its bold and colorful design instantly attracts attention and the features all look like excellent additions to the table.

This inversion table is also one of the most sturdy on offer as it is able to hold up to 350 lbs in weight.

The Exerpeutic 975 SL is suitable for users between the heights of 4 ft 9″ to 6 ft 6″.

Due to the heavy duty nature of this inversion table it is a great choice for larger or heavier users.

Padded memory foam backrest with optional lumbar pillow:

The large padded backrest contains 2.3 inches of soft memory foam padding to ensure some great comfort is provided when using this inversion table.

The strong and sturdy padded backrest is vinyl covered and has been double stitched to ensure full durability.

The inversion table also comes complete with a matching lumbar support pillow.

The lumbar pillow can be attached to the bed of the table when you feel the need for extra lower back support or can be removed if not needed.

The addition of the lumbar support pillow is a really nice extra, that most inversion tables do not feature.

The iControl disk brake system is a great way to lock the table at any inversion angle

iControl disk brake system for angle limitation:

The iControl disk brake system is a pretty revolutionary idea for limiting the inversion angle on the fly.

Unlike the more ridged pin selector method of angle limitation found on other inversion tables, the disk brake system allows for infinite inversion angles up to full inversion.

To use, simply invert any angle you require and pull the orange lever on the disk brake system to lock yourself into place.

This is a great feature to have on an inversion table, it’s especially good for performing sit-ups and crunches when in the inverted 180 degree position.

Another benefit to the iControl disk brake system is that you do not need to leave the table while you adjust it. unlike inversion tables with a tether strap.

For many, this feature is likely to be one of the main reasons to opt for this inversion table. And rightly so, as it really is a very useful feature to have.

Airsoft ankle holders & Surelock ankle lever:

The palm activated “Surelock” ratchet lever is a another good addition to this table, ensuring the user does not have to bend down to secure their ankles in place.

The double lock mechanism on the ankle lever provides great security to the user. Locking the ankle cups firmly in place.

The ankle cups on the Exerpeutic 975SL are also a very welcome feature, especially if you have found other inversion tables a little uncomfortable in this area.

The Airsoft ankle holders fit the shape of the users ankles perfectly, thanks to the multiple air chamber that make up their design.

The air chambers securely fit and adjust the ankle holders to the form of your legs and ankles, providing excellent security and exceptional comfort.

This is certainly one of the best ankle support systems available on an inversion table, not only for comfort but also for security and convenience.

Other features and quick specs:

One last notable feature to mention on the 975SL inversion table is the stretch handles located at either side of the lower floor bar.

These are good for helping with stability while inverting as well as stretching exercises.

The table features non skid floor stabilizers and has long side handles for extra support and assistance.

The table also comes with a drinks holder in which you can place a water bottle.

• Max weight capacity: 350 lbs
• User height adjustment: 4’9″ – 6’6″
• Dimensions Open: 75.6 x 31 x 58.3″ (L x W x H)
• Dimensions Folded: 39.5 x 32 x 74.5″ (H x W x D)
• Item Weight: 74.1 lbs
• Assembly required
• Folding design
• Nylon & memory foam padded backrest
• Optional lumbar support pillow
• Ergonomic Airsoft ankle supports
• Palm activated ratchet lever
• iControl disk brake inversion limiter
• Lower stretch handles
• Long side safety handles
• Non slip feet
• 1 year limited warranty from manufacturer

Is the Exerpeutic 975 SL Inversion table a worthwhile investment?

After reading this page you will probably agree that this is a fairly easy question to answer!

The Exerpeutic 975 SL is packed with so many (fairly unique) features that it is very hard to ignore.

While some of these features can be found on other inversion tables also, it is quite rare to find a table that possesses them all!

Add to this the fact that this table has a weight capacity of 350 lbs (50 lbs more than most other tables).

All in all, this is an excellent inversion table, that appears to have everything covered.

The iControl brake system alone, makes this table a great choice. However, then add the Airsoft ankle holders, the memory foam backrest and the easy reach ratchet lever into the mix, and you have a truly outstanding product.

Be sure to also check out the buyer reviews in the next tab or on visiting the retailer.

The Innova ITX9600 inversion table may not immediately stand out to you due to its fairly conservative design.

However, you only need to take a look at the buyer reviews in the next tab, to see that it is considered a good quality table at a low price.

You will also likely be surprised at just how many have left a review for this very popular table.

The Innova ITX9600 is able to hold a maximum weight capacity of 300 lbs and is suitable for users between the heights of 4 ft 10 in – 6 ft 6 in.

One of the main highlights of this table is how adjustable it is, it also has a great inversion limiting device that we will take a look at below.

Padded backrest and adjustable headrest:

A comfortable padded backrest is a fairly common feature on inversion tables these days, however the addition of an adjustable headrest is something rarely found!

The adjust-ability of this inversion table is (as mentioned earlier) one of the best things about this particular table.

As with all inversion tables can you control the height of the table to match your specific measurements.

However, the Innova ITX-9600 also allows you to adjust the headrest and the footrest, to ensure you can easily find the true center of gravity no matter what your body proportions are.

As you can see in the image to the right, all 3 of the adjustable features are labelled.

You will also notice that the image states the majority of inversion tables only feature one adjustable feature (user height).

If you have ever tried using an inversion table that is set at the wrong height for your body proportions. You will know how much harder it can be to invert.

With this table you can really dial in on the adjustments to make inversion completely effortless.

6 position pin system for angle limitation:

Rather than opting for the tether strap system found on so many inversion tables, the Innova ITX 9600 inversion table features this great looking pin system.

While there isn’t a huge advantage to having a pin system over a tether strap. A pin system is likely to be a little less hassle to use and adjust.

Also due to the pin system being a more ridged inversion angle restriction device, you can quickly get a good idea of what inversion angles are more preferable to you.

As you can see in the image, the pin system allows the user to invert up to the angles of 15, 30, 45, 60 or 85 degrees.

To adjust the angle you simply pull out the circular pin and place it within another selection hole.

If you decide you do not require any angle limitation, you can simply remove the pin from the side selectors and place it in the 90 degree selector at the top of the device. Thus allowing for complete unrestricted inversion!

Angle limitation is a great idea for inexperienced inversion users to gradually built up confidence on a table. It is also very useful if you are not a fan of inverting fully!

If you are quite unfamiliar with inversion angle limitation devices found on inversion tables, you can take a look at our features page here where we take a look at each in a little more detail.

Reversible ankle system:

The ankle system on the Innova ITX 9600 is fairly standard in design, although you can reverse it to suit your preference.

The ankle system features molded cup holders on one side and foam rollers on the opposite.

The majority of inversion tables tend to have the molded cups positioned at the back to support the back of the ankles. However if you prefer you can adjust the supports so the rollers are positioned at the back.

For most this probably will not be a feature that is particularly worthwhile. Although some may have a preference after they experiment with both settings.

To secure the ankles in place this inversion table has a fairly standard spring pin adjuster.

Other features and quick specs:

Aside from the fairly long side handles which are useful for when returning to the upright position there are no other notable features to mention.

• Max weight capacity: 300 lbs
• User height adjustment: 4’10” – 6’6″
• Dimensions: 52 x 28 x 59″
• Item Weight: 54 lbs
• Assembly required
• Folding design
• Padded backrest
• Ergonomic reversible ankle supports
• Adjustable headrest and footrest
• Pin inversion angle limiter (15, 30, 45, 60, 85 degrees)
• Long side safety handles

Is the Innova ITX9600 A worthwhile choice?

As you now know this rather simple looking inversion table actually possesses some very useful features.

These additional features alone make this inversion table from Innova an excellent choice!

In addition to this the low price is also a perfect reason to consider this table.

If you are on a budget this is an especially good inversion table to choose.

It is also a great entry level inversion table for those who may not know if inversion is right for them, since it is often available for half the price of other inversion tables on the market.

The buyer reviews for this table are mostly exceptional, and there are a lot of them to go on. You can take a look at them all in the next tab or on visiting the retailer.