The Health Gear ITM5500 is one of our recommended inversion tables that feature heat and vibration massage functionality.

The Health Gear ITM 5500 is fairly good value for money and has some very nice features.

Its bold racing style design is also something that sets it apart from many other inversion tables.

One minor issue some have however, is this inversion tables inability to go fully into 90 degree inversion. It does however, get very close to the full 90 degrees, but users are unable to hang freely from the backrest.

4 inch thick padded ‘racing style’ backrest:

The red and black backrest on this particular model really helps it to stand out from the crowd.

The racing style bed area is padded with 4 inches of memory-style foam, for firm yet comfortable stress free inversion therapy sessions.

The heating pad can be placed in the center of the padded backrest and seamlessly integrates to the design of the bed.

You can also remove the heat and vibrate pad should you prefer and the padded backrest remains a highly comfortable feature.

Due to the contoured design of the backrest it is also provides very good support to the user.

Pin selector angle limiter, extended ankle lever and rear stretch bar:

These extra features really add some nice touches to this Health Gear inversion table.

The pin selector angle limitation device is a system that is increasing becoming more and more popular.

If you wish to limit the angle of your inversion session you can do so by placing the limiting rod into one of the marked angle slots.

You can choose to limit the angle to 20, 40 or 60 degrees, or opt to not use the device to allow for (almost) full 90 degree inversion.

The pin system is very easy to use and quick to adjust, although some may find it a little limiting due to there only being 3 angle options to choose from.

The extended ankle lever is also becoming a popular addition to modern inversion tables.

It is particularly useful for those wishing not to put any additional strain upon their back while securing their ankles into the dual foam rollers.

The lever reduces the need to bend down too far when securing yourself onto the table, as is sometimes required on some other inversion table models.

The raised bump on the rear lower frame bar is also a great addition which can provide extra stability while inverted.

It also allows the user to stretch themselves a little more while in an inverted position.

Advanced heat and vibration massage pad:

The heat and vibration massage pad on the ITM-5500 inversion table runs all the way up the inside of the backrest, providing some soothing and relaxing heat and vibro massage while you invert.

The pad is electrically powered and can be plugged into a main socket to operate.

It also features a wired remote control which allows the user to adjust the heat and vibration settings, while they are inverted.

You also have the option to remove the pad should you require.

This also allows the heat pad to be used elsewhere such as on the bed or a sofa.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 5’1” – 6’5″
• Assembly required
• Folding design
• Thick padded racing style backrest
• Ergonomic dual roller ankle supports
• Extended ‘easy to reach’ ankle lock lever
• Pin inversion angle limiter (20/40/60/90 degrees)
• Long side safety handles
• Advanced heat and vibration massage pad
• Rear floor stretch handle

Is the Health Gear ITM5500 heat and vibration massage Inversion table the best choice?

When it comes to inversion tables that feature heat and massage functions, there a some pretty good options to choose from.

Due to its fairly good price the Health Gear ITM 5500 inversion table is certainly one of the best options currently available.

You can view some of the other options here in our best heat and massage inversion table guide.

Even if you opt not to use the heat and vibro massage pad, the ITM5500 is still a very good inversion table overall.

The extra features and the large padded backrest make it a very functional, comfortable and well built inversion table.

As is found with many inversion tables that feature heat and massage pads, there are a few complaints that the heat and massage functions are not particularly strong.

This however, is to be expected considering the price.

You simply will not get the same quality of heat or massage on an inversion table, that you would expect to find on a massage chair or high end massage product.

You can see for yourself what other buyers are saying about this fairly well rated inversion table in the next tab.

Overall this is a very good heat and vibrate inversion table to consider, just don’t expect too much from any heat and vibrate inversion table in this price range.

The Health Gear ITM7.5 inversion table is a very solid inversion table, that is highly recommended for those who are a bit too tall for the majority of other inversion tables.

The ITM 7.5 is able to accommodate users up to a height of 7 feet!

This makes it an excellent choice for anyone over 6 ft 6″ (the maximum height range on most inversion tables) who may find other inversion tables are not suitable for their high stature.

In addition to the extra height, the Health Gear ITM7.5 inversion table also provides some extra weight capacity when compared to the majority of other models.

The recommended weight capacity for the ITM7.5 is 400 lbs making it one of the highest weight capacity inversion tables available! (the average is usually 300 lbs)

The overall user height range is 5 ft 1″ – 7 ft.

In addition to this tables sturdy and accommodating design it is also packed with some great features which we will look at below.

Padded 4″ foam backrest with heat and massage pad:

If you are after a padded inversion table this is one of the most padded available, featuring over 4 inches of memory foam style padding in the bed and headrest.

The size of the bed area is also something that really makes this inversion table stand out as it is a very large, wide surface on which to place your body.

Since many padded inversion tables only feature a couple of inches of backrest padding this is certainly above the average. However, do be aware that the padding is stated as memory foam “style” and not listed as actual memory foam.

The headrest of the inversion table is adjustable so you can further add to the comfort by adjusting it to suit your body perfectly. It is due to the adjustable headrest that this table can provide the extra few inches of height that some taller users may require.

This inversion table also comes complete with a removable deluxe heat and vibrating massage pad that can be controlled using the wired hand controller.

Since the heat and massage pad is removable and lightweight you are not only limited to using it on the inversion table. You can also use the pad all around the home on your bed or on the sofa.

The heat and massage functions can be controlled using the handheld remote which allows you to adjust the heat, intensity and duration of the massage function.

Note: One thing to be aware of with heat and massage pads on inversion tables are that they are generally not very strong.

They are not designed to give a full on massage like you would receive from a massage chair. Often these pads simply provide a bit of heat and a gentle vibrate function for a little extra comfort and stimulation.

It is quite common to see buyers have issue with the heat and massage pads included with inversion tables in their reviews. Although it is fairly clear they are expecting a bit much from the pad.

For the most part a heat and massage pad is often a welcome addition for buyers, providing they accept that the functionality will have its limitations.

3 position system for inversion angle limitation:

The inversion angle limitation system is probably the feature that could be most improved upon with this inversion table.

The table features an adjustable bar that runs horizontally across the back part of the frame that can limit the angle of inversion to either 20, 40 or 60 degrees.

This is a fairly ridged and secure angle limitation device to have on the table, however it is a little limited since it only adjusts to 3 specific inversion angles.

Despite this, it is still a useful addition that is ideal for those not wishing to partake in full inversion while using the table.

It is also a simple system to use and adjust.

Sur-lock ankle lever and support system:

The ankle supports on the ITM 7.5 are dual padded high density foam rollers to ensure complete ankle comfort while inverting.

The foam rollers can be easily clamped around your ankles using the extra long ankle locking arm which removes the need to bend down when securing yourself onto the table.

Having an extra long ankle lever is always a nice addition to any inversion table.

It certainly makes securing yourself on the table easier to do and it is less effort than having to bend all the way down to secure your ankles.

Other features and quick specs:

• Max weight capacity: 400 lbs
• User height adjustment: 5’1″ – 7’0″
• Item Weight: 101 lbs
• Assembly required
• Folding locking frame design for easy storage
• 4 inch thick memory foam style padded backrest
• Adjustable headrest (add 6″ height)
• Removable and portable heat and massage pad
• Hand controller to adjust heat and massage settings
• Ergonomic foam roller ankle supports
• Extra long ratchet lever for ankle security
• 20, 40 and 60 degree inversion limiter bar system
• Long side safety handles
• Non slip feet
• Front fork design for stability even on uneven floors
• Frame made from 2.5″ heavy gauge steel tubing
• All Health Gear products are tested to a 50 point performance and safety standards

Is the Health Gear ITM7.5 big and tall Inversion table a good choice?

If you are on the taller side or need a little extra weight capacity the Health Gear ITM 7.5 is an excellent choice.

If you have read our blog post on the best inversion tables for larger people. You will already know that most inversion tables tend to have a maximum weight capacity of 300 lbs and a height range that is limited to 6 ft 6″. You will also know that there are very few inversion tables that exceed these limits.

Therefore if you are over 6 ft 6″ the Health Gear ITM 7.5 is one of the only inversion tables that has been manufactured to accommodate someone of your height.

The high 400 lbs weight capacity is also a great feature!

If you do not need the additional height is it still a good choice?

If you are under 6 ft 6″ you should still find this inversion table a very good table overall. However the price may be a little off-putting, especially if you do not need the extra weight capacity either!

If the high 400 lbs weight capacity is what drew your attention to this particular table, you may wish to take a look at the IronMan 4000 or the Exerpeutic 975 SL.

Both the alternative options listed have (above average) weight capacities of 350 lbs and they are both currently a lot lower in price! So you need to ask yourself if you really need the extra 50 lbs weight capacity that the ITM7.5 can provide?

Overall 

There is no denying that the Health Gear ITM 7.5 inversion table is a pretty good inversion table overall.

It has a number of worthwhile features and the backrest and heat pad are some really good highlights.

However, if you take into consideration the high price of the inversion table, these features alone do not really justify the high price tag.

Therefore, unless you are interested in the ITM 7.5 because of the extra height it can provide or because you feel the 400 lbs weight capacity is necessary for you. It would be more cost effective to purchase a cheaper heavy duty inversion table, such as the Ironman or Exerpeutic models listed above.