The Health Gear ITM5500 is one of our recommended inversion tables that feature heat and vibration massage functionality.

The Health Gear ITM 5500 is fairly good value for money and has some very nice features.

Its bold racing style design is also something that sets it apart from many other inversion tables.

One minor issue some have however, is this inversion tables inability to go fully into 90 degree inversion. It does however, get very close to the full 90 degrees, but users are unable to hang freely from the backrest.

4 inch thick padded ‘racing style’ backrest:

The red and black backrest on this particular model really helps it to stand out from the crowd.

The racing style bed area is padded with 4 inches of memory-style foam, for firm yet comfortable stress free inversion therapy sessions.

The heating pad can be placed in the center of the padded backrest and seamlessly integrates to the design of the bed.

You can also remove the heat and vibrate pad should you prefer and the padded backrest remains a highly comfortable feature.

Due to the contoured design of the backrest it is also provides very good support to the user.

Pin selector angle limiter, extended ankle lever and rear stretch bar:

These extra features really add some nice touches to this Health Gear inversion table.

The pin selector angle limitation device is a system that is increasing becoming more and more popular.

If you wish to limit the angle of your inversion session you can do so by placing the limiting rod into one of the marked angle slots.

You can choose to limit the angle to 20, 40 or 60 degrees, or opt to not use the device to allow for (almost) full 90 degree inversion.

The pin system is very easy to use and quick to adjust, although some may find it a little limiting due to there only being 3 angle options to choose from.

The extended ankle lever is also becoming a popular addition to modern inversion tables.

It is particularly useful for those wishing not to put any additional strain upon their back while securing their ankles into the dual foam rollers.

The lever reduces the need to bend down too far when securing yourself onto the table, as is sometimes required on some other inversion table models.

The raised bump on the rear lower frame bar is also a great addition which can provide extra stability while inverted.

It also allows the user to stretch themselves a little more while in an inverted position.

Advanced heat and vibration massage pad:

The heat and vibration massage pad on the ITM-5500 inversion table runs all the way up the inside of the backrest, providing some soothing and relaxing heat and vibro massage while you invert.

The pad is electrically powered and can be plugged into a main socket to operate.

It also features a wired remote control which allows the user to adjust the heat and vibration settings, while they are inverted.

You also have the option to remove the pad should you require.

This also allows the heat pad to be used elsewhere such as on the bed or a sofa.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 5’1” – 6’5″
• Assembly required
• Folding design
• Thick padded racing style backrest
• Ergonomic dual roller ankle supports
• Extended ‘easy to reach’ ankle lock lever
• Pin inversion angle limiter (20/40/60/90 degrees)
• Long side safety handles
• Advanced heat and vibration massage pad
• Rear floor stretch handle

Is the Health Gear ITM5500 heat and vibration massage Inversion table the best choice?

When it comes to inversion tables that feature heat and massage functions, there a some pretty good options to choose from.

Due to its fairly good price the Health Gear ITM 5500 inversion table is certainly one of the best options currently available.

You can view some of the other options here in our best heat and massage inversion table guide.

Even if you opt not to use the heat and vibro massage pad, the ITM5500 is still a very good inversion table overall.

The extra features and the large padded backrest make it a very functional, comfortable and well built inversion table.

As is found with many inversion tables that feature heat and massage pads, there are a few complaints that the heat and massage functions are not particularly strong.

This however, is to be expected considering the price.

You simply will not get the same quality of heat or massage on an inversion table, that you would expect to find on a massage chair or high end massage product.

You can see for yourself what other buyers are saying about this fairly well rated inversion table in the next tab.

Overall this is a very good heat and vibrate inversion table to consider, just don’t expect too much from any heat and vibrate inversion table in this price range.

The Innova ITM 4800 advanced heat and massage therapy inversion table is a very similar table in many respects to the lower priced Innova ITX 9600 (one of the best budget inversion tables currently available.)

The main difference with this table is the heat and vibration massage pad. In fact this feature is really the only reason you would opt for this inversion table over the ITX 9600.

If you have no interest in the heat and vibration massage pad we recommend you save some cash and have a look at the Innova ITX 9600 inversion table.

On the other hand if you are on the lookout for a fairly well priced inversion table that has heat and massage functions this is one of the best available!

Padded backrest and adjustable headrest:

The large and fairly wide padded backrest is a feature that is commonly found on many modern inversion tables and is always a nice feature that provides welcome comfort.

The adjustable headrest however is a less common feature.

The adjustable headrest is useful as it allows the user to customize the table a little more to their body length and comfort preference.

The footrest can also be adjusted in small increments also providing even more specification.

Pin Selector angle limiter:

If you wish to limit the angle at which you invert at on this inversion table you can use the pin selector device on the side of the table.

While this system is a little more rigid than the usual tether strap device, there are plenty of angles to choose from.

When using the Innova ITM4800 you have the choice of 5 angular increments as well as full 180 degree inversion.

The angle can be limited to either 15, 30, 45, 60 or 85 degrees. These can be selected by simply placing the selector rod into the corresponding slot.

There is also a 90 (180) degree slot on top of the device where you can place the pin if no restriction is desired.

Heat and vibration massage lumbar pad:

The real stand out feature is the lumbar pad with the heat and massage functions.

It is fairly common for heat and massage functions and pads on inversion tables to feel a little useless to some users.

On other models many will state how ineffective the heat was, or how weak the massage is. However on this model, many reviewers feel it is a very good feature.

The pad is powered by the mains and can be plugged into a wall socket to operate.

The wire for the pad is also fairly long so you don’t have to worry about setting the inversion table up near a power outlet.

The heat and massage pad is operated using a wired remote control which lets you choose between auto and manual settings.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 4’10” – 6’6″
• Item Weight: 57 lbs
• Assembly required
• Folding design
• Padded backrest
• Ergonomic ankle supports
• Adjustable headrest and footrest
• Pin inversion angle limiter (15, 30, 45, 60, 85 degrees)
• Long side safety handles
• Lumbar pad with heat and vibration massage

Is the Innova ITM4800 heat and vibration massage Inversion table one of the best options?

The Innova ITM 4800 is a very good inversion table to consider, it has very positive reviews and the heat and massage pad is a great addition!

However before committing to this table be sure to take a look at the more advanced Innova ITM 5900 inversion table.

While the 5900 inversion table from Innova does cost a tiny bit extra, it is overall a better and slightly more advanced inversion table.

It also comes complete with a full spinal massage and heated lumbar pad which covers more of the spinal area compared the lumbar pad on this 4800 model.

The buyer reviews for this ITM4800 Innova inversion table are very positive overall and this is one of the most popular heat and massage inversion tables currently available.

It is also very well priced and one of the cheapest heat and massage inversion tables.

Overall we (and many others) feel the Innova ITM 4800 heat and massage therapy inversion table is a very good table to consider.

However, due to the pricing of the Innova ITM5900 often being similar to this model, the ITM4800 is overshadowed somewhat.

If you are prepared to spend a little extra we would recommend you opt for the ITM 5900 over this model.

The Exerpeutic 475 SL inversion table is a similar but newer model to the very well rated Exerpeutic 225 SL inversion table.

Both the 475 and 225 SL are very well rated inversion tables and fall into similar price brackets.

However The 475 SL inversion table is (for many) probably a better choice overall due to some slightly better features.

The Exerpeutic 475 SL also has a higher 300 lbs weight capacity and is able to invert to a higher angle (listed as 180 but perhaps closer to 175). Whereas the 225 SL has a weight capacity of 250 lbs and inverts only to 165 degrees at full inversion.

Much like the 225 SL model on this Exerpeutic inversion table you have the choice of either standard ankle holders or more comfortable Airsoft ankle holders (more on these later).

Note – The price stated above is the cost of the inversion table with the Airsoft ankle braces. On visiting the retailer you can view the model with standard ankle clamps which costs less.

1.8 Inch Padded backrest and 2 position headrest:

With each Exerpeutic inversion table the different models tend to have thicker padding on the backrest and a higher weight capacity.

The 225 SL features 1″ padded backrest and has a 250 lbs weight capacity.

The 475 SL (this model) features 1.8″ padded backrest and has a 300 lbs weight capacity.

The 975 SL features 2.3″ padded backrest and has a 350 lbs weight capacity.

The backrest and headrest is padded with 1.8 inches soft foam and and the headrest is separated from the main area of the backrest.

This allows you have the option to either adjust the headrest of the table to meet with the rest of the backrest or extend it slightly to suit your body length or comfort preference.

One difference between this model and the other two Exerpeutic inversion table models listed above, is the 475 SL doesn’t come with a lumbar support pillow whereas the other two do.

However, you could perhaps use a rolled up towel to make a make shift lumbar pillow if you feel it is really necessary. Or opt for one of the other Exerpeutic inversion tables available.

Pin Selector angle limiter, rear floor stretch bar and long side handles:

The pin selector angle limiter is a robust way to limit the inversion angle, should you wish to.

On the pin selector there are 4 options of 20, 35, 55 and 75 degrees.

To limit the inversion angle you simply place the pin in the appropriate slot to hold the table at that angle when inverting.

Choosing the 20 degree slot slot will give a very mild inversion, keeping you fairly close to the horizontal position, whereas at 75 degrees you will be closer to full inversion.

You of course also have the option not to use the limiter and invert fully at around 175 – 180 degrees.

As with most other Exerpeutic inversion tables this table features extra long side handles and an upward curving stretch bar situated on the horizontal rear floor bar.

The stretch bars on Exerpeutic inversion tables are a nice touch and great for easy positioning and increased stability while inverted.

They also provide the option to stretch your whole body in an effortless way while inverted.

Airsoft ankle holders and extra long ratchet lever:

Uncomfortable ankle holders on inversion tables are often one of the main complaints buyers have.

luckily on most inversion tables from Exerpeutic you have the option to choose between regular molded plastic ankle cups or their patent pending Airsoft ankle supports.

Since the Airsoft ankle supports are one of the best features on Exerpeutic tables it is highly recommended you opt for them.

They are a great feature for added support and comfort, however they do boost the cost of the table up a little.

The Airsoft ankle holders have been designed to let air to freely flow into the different chambers of each ankle holder. This allows the supports to mold and adjust to the shape of your legs.

The extra padding on the ankle holders also provides much better comfort than you would get using the standard u-shaped plastic cups.

Nb – You can opt not to have the Airsoft ankle holders on this model by visiting the retailer and choosing the without option. 

Another useful feature on this, and other inversion tables from Exerpeutic is the palm activated ratchet locking system.

This feature allows users to lock their ankles in place without having to bend down and risk putting strain on their back.

While this may not seem a great feature to the more agile among us, less agile users will likely find this feature very useful.

The ratchet also has a double lock mechanism so the ankles are locked in place extremely securely for maximum safety.

Other features and quick specs:

• Max weight capacity: 300 lbs
• User height adjustment: 4’9” – 6’6″
• Dimensions: 56 x 32 x 70.5″ (L x W x H)
• Item Weight: 70.5 lbs
• Assembly required
• Folding design
• 1.8 inch padded backrest
• 2 stage adjustable headrest
• Palm activated ankle lock lever
• Double ankle lock system
• Long side safety handles
• Pin selection angle limitation device
• Airsoft ankle supports
• Rear stretch bar

Is the Exerpeutic 475 SL Inversion table a good option?

If you are going to buy an Exerpeutic inversion table, the 475 SL is one of the top 2 best options available. The other being the more expensive Exerputic 975 SL which is also an extremely good choice.

The best reason to opt for this inversion table over many others is due to the many features, most notably the Airsoft ankle holders.

Although budget inversion tables can be very good in their own respect, many lack the added extras and comfort found on inversion tables like this, that tend to be around double the price.

The headrest, backrest and Airsoft ankle supports all combine to make a very comfortable inversion table that provides great support and a stable solution for inversion therapy.

The design of this inversion table is very robust and the table is well made, as are all of the Exerpeutic inversion products listed on our site.

If cash is not a big deal, we would really recommend the Exerpeutic 975 SL inversion table over this model.

However, for value for money this inversion table really is worth a look and has some very good ratings as you can see in the next tab.

The Innova ITX9600 inversion table may not immediately stand out to you due to its fairly conservative design.

However, you only need to take a look at the buyer reviews in the next tab, to see that it is considered a good quality table at a low price.

You will also likely be surprised at just how many have left a review for this very popular table.

The Innova ITX9600 is able to hold a maximum weight capacity of 300 lbs and is suitable for users between the heights of 4 ft 10 in – 6 ft 6 in.

One of the main highlights of this table is how adjustable it is, it also has a great inversion limiting device that we will take a look at below.

Padded backrest and adjustable headrest:

A comfortable padded backrest is a fairly common feature on inversion tables these days, however the addition of an adjustable headrest is something rarely found!

The adjust-ability of this inversion table is (as mentioned earlier) one of the best things about this particular table.

As with all inversion tables can you control the height of the table to match your specific measurements.

However, the Innova ITX-9600 also allows you to adjust the headrest and the footrest, to ensure you can easily find the true center of gravity no matter what your body proportions are.

As you can see in the image to the right, all 3 of the adjustable features are labelled.

You will also notice that the image states the majority of inversion tables only feature one adjustable feature (user height).

If you have ever tried using an inversion table that is set at the wrong height for your body proportions. You will know how much harder it can be to invert.

With this table you can really dial in on the adjustments to make inversion completely effortless.

6 position pin system for angle limitation:

Rather than opting for the tether strap system found on so many inversion tables, the Innova ITX 9600 inversion table features this great looking pin system.

While there isn’t a huge advantage to having a pin system over a tether strap. A pin system is likely to be a little less hassle to use and adjust.

Also due to the pin system being a more ridged inversion angle restriction device, you can quickly get a good idea of what inversion angles are more preferable to you.

As you can see in the image, the pin system allows the user to invert up to the angles of 15, 30, 45, 60 or 85 degrees.

To adjust the angle you simply pull out the circular pin and place it within another selection hole.

If you decide you do not require any angle limitation, you can simply remove the pin from the side selectors and place it in the 90 degree selector at the top of the device. Thus allowing for complete unrestricted inversion!

Angle limitation is a great idea for inexperienced inversion users to gradually built up confidence on a table. It is also very useful if you are not a fan of inverting fully!

If you are quite unfamiliar with inversion angle limitation devices found on inversion tables, you can take a look at our features page here where we take a look at each in a little more detail.

Reversible ankle system:

The ankle system on the Innova ITX 9600 is fairly standard in design, although you can reverse it to suit your preference.

The ankle system features molded cup holders on one side and foam rollers on the opposite.

The majority of inversion tables tend to have the molded cups positioned at the back to support the back of the ankles. However if you prefer you can adjust the supports so the rollers are positioned at the back.

For most this probably will not be a feature that is particularly worthwhile. Although some may have a preference after they experiment with both settings.

To secure the ankles in place this inversion table has a fairly standard spring pin adjuster.

Other features and quick specs:

Aside from the fairly long side handles which are useful for when returning to the upright position there are no other notable features to mention.

• Max weight capacity: 300 lbs
• User height adjustment: 4’10” – 6’6″
• Dimensions: 52 x 28 x 59″
• Item Weight: 54 lbs
• Assembly required
• Folding design
• Padded backrest
• Ergonomic reversible ankle supports
• Adjustable headrest and footrest
• Pin inversion angle limiter (15, 30, 45, 60, 85 degrees)
• Long side safety handles

Is the Innova ITX9600 A worthwhile choice?

As you now know this rather simple looking inversion table actually possesses some very useful features.

These additional features alone make this inversion table from Innova an excellent choice!

In addition to this the low price is also a perfect reason to consider this table.

If you are on a budget this is an especially good inversion table to choose.

It is also a great entry level inversion table for those who may not know if inversion is right for them, since it is often available for half the price of other inversion tables on the market.

The buyer reviews for this table are mostly exceptional, and there are a lot of them to go on. You can take a look at them all in the next tab or on visiting the retailer.